More results...

Subjects

Desert Lotus

Desert Lotus is an expanding dome designed by Michael Burton. The goal of the project was to create a kinetic structure that could act as a collapsable, temporary installation or kiosk. Consisting of 3 layers of panels, the Dome as built stands about 7 feet tall and expands from a 6 foot diameter to a 14 foot diameter.

When expanded, the dome can fit several people comfortably both standing and sitting. When not in use, it can be collapsed and becomes a sculptural piece. It is constructed entirely of wood with common hardware used in all of the joints and a series of steel angled pieces at the top layer.

The dome is supported by its perimeter as well as a central metal pole that would be anchored into the ground to act as a center-point for motion. Designers intend to add some kind of covering to the panels of the dome that twists with the structure and to add another layer of panels to the base. Addition of a fourth layer would increase the height and expanded width to 10 feet and 18 feet respectively.

Comments

Click here to cancel reply.

You must be logged in to post a comment.

Field Trap

In this Grasshopper Dendro example file, you can use the Trap Field component from the Heteroptera plugin to generate a series of random connecting curves between two faces.

Box Ring

In this Grasshopper tutorial for beginners, you can learn how to model a parametric box ring from scratch without using any plugins.

Parametric Earrings

In this Grasshopper Kangaroo example file you can design a parametric earring using the circle packing technique.

Parametric Louver

In this Grasshopper example file you can design a parametric Louver facade using the Pufferfish Plugin.

Parametric Building

In this Grasshopper example file you can design a parametric building using the native grasshopper components.

Field Dendro

In this Grasshopper Dendro tutorial, you can learn how to create a growing mesh by defining a series of spin fields on a NURBS surface using the Heteroptera plugin.

Sphere Collide

In this Grasshopper Tutorial for beginners you will learn how to use the Sphere collide component to generate evenly distributed holes on a NURBS surface.

Circle Pack Mesh

In this Grasshopper Kangaroo example file, you can circle pack a mesh using the "TangentIncircles" component.

Twisted Torus

In this Grasshopper example file, you can utilize the Nautilus plugin to design a parametric Twisted Torus.

Torus Strips

In this Grasshopper example file, you can model twisted torus strips and convert them into a spaceframe and panels using the Lunchbox Plugin.

Mesh groove

In this Grasshopper example file, you can convert a series of curves into a mesh with a 3d groove pattern using the Nautilus and Weaverbird plugins.

Box Joints

In this Grasshopper tutorial, you will learn how to model a parametric joint on the corners of a box with controllable parameters.

Spatial Network

In this Grasshopper example file, you can simulate an optimized path from an origin point/points toward a set of targets. The strategy involves branching at diverging points.

Staircase Drawing

In this Grasshopper example file, you can model a staircase detail drawing from the plan view and easily change the parameters.

Facade Scripts

In this Grasshopper example file, you can design a parametric facade using four different techniques.

Contour Techniques

In this Grasshopper contour tutorial, we will learn how to extract a series of solids from a part of a mesh by defining the direction and length with a single line.

Millipede Pavilion

In this Grasshopper Millipede tutorial, you can learn how to model a series of smooth connecting columns to a roof and then analyze it using Millipede's Finite Element Analysis.

Kangaroo Flow

In this Grasshopper Kangaroo tutorial, you can discover how to simulate the flow of a series of particles on a solid and then convert it into a mesh.

Perlin Noise

In this Grasshopper tutorial, you can learn how to generate Perlin noise on a surface and convert it into a solid.

Structural Grid

In this Grasshopper tutorial, we will learn how to generate a structural grid from a series of grid points.

Gear & Mechanism

In this Grasshopper tutorial, we will explore how to create a simple parametric gear and a radial mechanism, and also include an example file for the Iris mechanism.

Tower Floors

Tangent Arcs

In this Grasshopper tutorial, we will learn how to create a series of parametric solids using the "Tangent Arcs" component.

Brick Wall

In this Grasshopper tutorial, we will model a parametric brick wall on a NURBS surface with a rectangular projection. We can also adjust the thickness of the bricks based on point attractors.