Stella3d Seek Force
In this grasshopper tutorial you can use stella3d to simulate particles which move towards a series of defined curves. This tutorial will help you understand how the seek force component works.
Tutorial By: Erfan Rezaei
In this grasshopper tutorial you can use stella3d to simulate particles which move towards a series of defined curves. This tutorial will help you understand how the seek force component works.
Tutorial By: Erfan Rezaei
In this Grasshopper Galapagos Tutorial, you can learn how to design a parametric form engine by recording the different shapes generated by Galapagos.
In this Grasshopper Mesh+ Tutorial, you can learn how to use the Box component combined with the Catmull Clark component from the Mesh+ plugin.
In this rhino grasshopper tutorial, you will learn how to use the Galapagos component to optimize the length of a path between two points.
In this rhino grasshopper tutorial, you will learn how to generate a sine wave pattern on a NURBS surface using an amplitude and a frequency parameter.
In this Rhino Grasshopper tutorial, you will learn how to generate parametric Random boxes with their top faces rotated in two directions.
In this Rhino Grasshopper tutorial, you can use the Crane plugin to fold and unfold an origami pattern. This plugin can help you fold any origami pattern by having the mountain/valley/border lines.
In this Rhino Grasshopper Tutorial, we will first take a look at some related projects to Auxetics & Metamaterials and then we will use the Linketix Plugin to design several Auxetic patterns.
In geometry, circle packing is the study of the arrangement of circles on a given surface. In this video, you can see an overview of Circle Packing.
In this Rhino Grasshopper Tutorial, we are going to talk about Stereographic Projection. First, we will take a look at different projects related to Stereographic Projection and then we will model a parametric pattern in Grasshopper step-by-step and from scratch.
In this Rhino Grasshopper tutorial, You can learn how to use the Weaverbird Plugin to model a stellate mesh and then smooth it and convert it into a circle packing algorithm.
In this Grasshopper tutorial, You can learn how to model a series of Procedural Cellular patterns using the Bitmap+ Plugin and then use the Parakeet plugin to convert it into a series of regions.
In this Rhino Grasshopper tutorial, you can learn how to model a parametric stair railing in Grasshopper from scratch. First, we will model the random base curves and then use the Pufferfish plugin (Tween Consecutive Curves) to extract the final curves.
In this Grasshopper tutorial, we are going to model a Kinetic Toy from scratch and how to use a graph mapper to model different Waveforms.
In this Rhino Grasshopper tutorial, we are going to use the Voronoi3d combined with a multipipe (Rhino 7) component to model a parametric 3d form in a Box.
In this grasshopper tutorial, we are going to use the Kangaroo 2 plugin to model a tensile structure by using a rectangular mesh base and a series of curves for controlling the overall shape.
In this Beginner Rhino Grasshopper Tutorial we are going to model a polygonal concrete Planter from scratch and then use the Pufferfish plugin to give it a thickness.
In this 3D Printing Fabric video (from the 3D Printing tutorial series), we will look at different ways you can use 3D printing to make Fabrics. Then, we will model simple chainmail in Rhino Grasshopper.
In this Weaverbird Grasshopper Tutorial, we are going to use two simple boxes to model the base parametric shape of the smooth mesh. We will use the Weaverbird plugin to smooth the final results.
In this Rhino Grasshopper tutorial, we are going to model a parametric rotating 3d pattern on a curve (closed or open) and then convert it into a smooth mesh.
In this Rhino Grasshopper tutorial, you will learn how to use the Pufferfish plugin component called "Twisted Box Through Surfaces" to morph a dodecahedron between two surfaces.
In this Rhino Grasshopper Tutorial, you can model a series of twisting boxes by defining rectangular sections and then use the graph mapper to extract the non-linear distribution of the sections.
In this Rhino 7 grasshopper tutorial, we are going to take a look at the Subd component called "Multipipe" and how you can use it in Grasshopper to model a parametric polar model.
In this tutorial, we will show how to make a Trefoil Knot in Rhino Grasshopper and then remodel it by defining geometrical parameters.
In this Rhino Grasshopper Tutorial, we are going to model a parametric circular Loft surface by using the Graph Mapper Component.
Become a ParaCourse member & access exclusive content |
Comments
Cfeldman
Nice Work,Thanks!
rezae
Thank you Claudio
Cfeldman
Sorry, again here :
1-At the beginning, you have “several Texts”, which are changed one after another
… could you show in a second Part how you have done it?
2-I would like to apply that situation, but instead of starting from “Text / s”,
Starting from “images-Line Drawings”,changing one after the other,How should I insert them?
Help!
Very interesting
Greetings
Cfeldman
Attachment Bird_1_Stella_First_Frame.png
I try to do the same work, but with a Group ‘Images’.
( the images are maked with Curves,so it s the same in the Beginning).
Video is ok !, with one image… :
https://youtu.be/dRIqRM9ZHb8
But after that…
third, third to fourth image? for instance?
Anemone?
(The Images-Drawings is not the problem, as they are curved,
and not necessarily of Birds, but they can be Geometries,
but how to change from a first to a second to a third image?)
Greetings
Thanks for the reply
rezae
Attachment Seek-force-list.zip
Hi Claudio,
I’ve attached the seek force that works with list of text. You can change the text by Increasing Path number slider
rezae
I guess with the same method that I’ve attached you can change the drawings.
Many thanks
rezae
Let me know if there was any problem
Cfeldman
Thanks Rezae !
I am trying, …i hope that works !!
—Really Thank you, I hope this goes as I wish,
I look like a 7 year old boy !.
But you know this is all new.—
Greetings
rezae
Hi Claudio!
Claudio, I encourage your curiosity.
I’m so glad and excited about you, working with Stella3d.
Cfeldman
I think I need to change in the “Generating Target”,
The “Text” Component of the Fox plugin,
… but I don’t know which one to replace it with?
It can read-take different Drawings (lines) and not Texts, as in the “Text” command it appears.
(after Merge, the different line drawings)
It seems to me that there would be the error that I do not solve.
Would you know how Stella could read Simple Line Drawings instead of Texts?
– Although Texts are also made of Lines.
How is it that you took Texts and not Graphics-Drawings?
-That Fox Text command, has the reference of the original point and the dimension, it seems important to originate everything later-.
But I don’t know how to replace it yet.
Well I’m looking for how …
Thanks
Greetings
Cfeldman
Yes, …work it!
changing the ‘Text’command for ‘Stream Filter'(Curves)+Slider.
But no easy yet
Greetings
Cfeldman
https://youtu.be/Tyi5efMkB3I
Thanks your help
rezae
Cool!
That’s fantastic