Shade Structure

In this Grasshopper tutorial, you will create a parametric shade structure by defining a rectangular plan and using a curve as an attractor for the rib’s wave form.

Tutorial by Mohammad Yazdi

Duration : 30 Minutes

Video Tutorial


💎🚀 Upgrade to Paracourse for full access.

In this Grasshopper tutorial, you will create a parametric shade structure by defining a rectangular plan and using a curve as an attractor for the rib’s wave form.

💎🚀 Upgrade to Paracourse for full access.

Reviews

There are no reviews yet.

Be the first to review “Shade Structure”

Related products

3D Helix

In this Grasshopper tutorial you can learn how to model a 3d helix from scratch and also learn the basics of the "Plane" input.
3D Plate

3D Plate

In this Grasshopper tutorial you can learn how to model a 3d plate by defining two curve boundaries.

Anemone Building

In this Grasshopper Anemone Tutorial you can learn how to model a parametric building from a polyline or curve.
Anemone Loop Extrude
8C76DC8C-F7A8-46E8-8CBE-34B23C5430B5-300x300-1.webp

Anemone Loop Extrude

In this example file, you can use the Anemone plugin to make a recursive model of an extrusion on a polyhedra.

Anemone Tower

In this Grasshopper Tutorial, you will design a recursive building using the Anemone plugin, with control over the plan curve, deformation, and twisting of the tower.
Attractor Ribs
Attractor Ribs

Attractor Ribs

,
In this Grasshopper tutorial we will learn how to model a zero-waste parametric wall by defining a series of point attractors.

Bench Concept

In this Grasshopper tutorial, you will learn how to model a parametric bench using a series of curves, allowing you to quickly develop and refine the final concept.

Bin Packing Nesting

In this Grasshopper tutorial, you will learn how to place contour sections inside a group of rectangles and use the OpenNest plugin to nest them within a sheet. We will also use Galapagos to optimize the output.
Blind Finger Joint
Blind Finger Joint

Blind Finger Joint

In this short example file, you can use the Biber plugin to design a parametric Blind Finger Joint for a box.

Boundary Cutters

In this Grasshopper Kangaroo tutorial, you will learn how to create a mesh by defining a boundary and a series of opening curves.
Box Attractor
Box Attractor

Box Attractor

In this Grasshopper tutorial we are going to take a look at the algorithm which you can generate a parametric model with a series of boxes and their distances from a point attractor.
Box Joints

Box Joints

In this Grasshopper tutorial, you will learn how to model a parametric joint on the corners of a box with controllable parameters for the node’s radius, the flat face radius, and the pipe’s radius. At the end, you can nest the parts on the ground and display their dimensions for enhanced data visualization.