Lining Yao is a Masters student and research assistant in the Tangible Media Group at the MIT Media Lab who designed and fabricated parametric installations. The ball is made of 60 pieces of squares. The torus has an entire 3D shaped built out of card board.

Meandering down a section of Robson Street on the iconic 800 block in downtown Vancouver, passers-by can sit, relax, play, and socialize on the “Urban Reef” installation designed by Kaz Bremner and Jeremiah Deutscher.

This project by Vaishnavi Ramesh was a study and an exploration of how modular systems work on a fundamental level, and how they can be used in everyday design.The modular system revolves around the principle of repetitiveness to play with the figurative and structural role of design.

Researchers from Switzerland’s ETH Zurich university will use robots and 3D printers to design and build a pioneering three-storey house at a local research and innovation campus. Eight professors from ETH Zurich are working with business partners to build the DFAB House.

In collaboration with microsoft research, artist-in-residence jenny sabin has designed the ‘ada’ installation for the tech company’s redmond campus. The work takes its name from ada lovelace, mathematician who is often credited as one of the first computer programmer.

Paul Robinson has been working on  a universal bracket that can be used not only for any frequency geodesic dome but many other structures as well. A single universal bracket that can join any number of struts at any angle.

The project Mobile Robotic Fabrication System for Filament Structures by Maria Yablonina, demonstrates a new production process for filament structures. It proposes multiple semi-autonomous wall climbing robots to distribute fiber filament, using any horizontal or vertical surface.

This pavilion by Milad Showkatbakhsh, Chritopher Testa, Chris Yu and Shayna Cooper explores the limits of composite aluminum panels. With the use of parametric modelling and digital fabrication, a unitized panel system was designed that aggregates to operate as a larger system of surfaces.

Stone PolySphere installation, designed by Maurizio Barberio and Giuseppe Fallacara (New Fundamentals Research Group), investigates the potential of digital fabrication applied to the stone industry. Stone PolySphere is a lithic sphere with a diameter of 1.4 meters, composed by a massive hemisphere below and a stereotomic hemisphere above.

Designed by the Mediated Matter research group at the MIT Media Lab in collaboration with Prof. Fiorenzo Omenetto (TUFTS University) and Dr. James Weaver (WYSS Institute, Harvard University), The Silk Pavilion explores the relationship between digital and biological fabrication on product and architectural scales.

The research team at the Institute for Computational Design (ICD) and the Institute of Building Structures and Structural Design (ITKE) have taken morphological inspiration from the structure of the sea urchin and the sand dollar, both sea-bed invertebrates, to create what almost bears semblance to a floating bee hive, in a team combining architects, engineers, biologists, and palaeontologists.

Altair, Materialise and Renishaw collaborated to successfully create a lattice structured spider bracket; a functional structure which is lightweight, robust and reminds biological lifeforms. The design for the spider bracket was generated using Altair OptiStruct, prepared for printing with Materialise software Magics, 3-matic and the Build Processor, to be 3D printed on Renishaw’s AM250 metal additive manufacturing system.

This is a 4D printing video by Pranavee M of 4D printing in action. 5 videos put together showing tests from MIT Self assembly laboratory demonstrating the functionality of shape transformation. Flat-printed structures that, once placed in hot water, slowly folds themselves into another structure.

1:1 prototypes (Spring 2012) conducted by Jelle Feringa at the Hyperbody research group of the Faculty of Architecture, TU Delft, Netherlands, invited Matthias Rippmann to teach about designing funicular shells with RhinoVAULT. rV was used for the design of the exciting cut-foam pavilion resulting from the 2 week design-build digital fabrication workshop.

This is a 4D printing video by Pranavee M of 4D printing in action. 5 videos put together showing tests from MIT Self assembly laboratory demonstrating the functionality of shape transformation. Flat-printed structures that, once placed in hot water, slowly folds themselves into another structure.

1:1 prototypes (Spring 2012) conducted by Jelle Feringa at the Hyperbody research group of the Faculty of Architecture, TU Delft, Netherlands, invited Matthias Rippmann to teach about designing funicular shells with RhinoVAULT. rV was used for the design of the exciting cut-foam pavilion resulting from the 2 week design-build digital fabrication workshop.

Fold finding – a novel approach to folded structures – This project, created by Architect Tal Friedman, describes the design and fabrication process of the first self supported folded cantilever made entirely by folding sheets into their final position. 

Fold finding – a novel approach to folded structures – This project, created by Architect Tal Friedman, describes the design and fabrication process of the first self supported folded cantilever made entirely by folding sheets into their final position. 

A team of researchers from the Georgia Institute of Technology has developed a way to use 3-D printers to create objects capable of expanding dramatically that could someday be used in applications ranging from space missions to biomedical devices.

A team of researchers from the Georgia Institute of Technology has developed a way to use 3-D printers to create objects capable of expanding dramatically that could someday be used in applications ranging from space missions to biomedical devices.