This paper by Alessandro Liuti, Sofia Colabella, and Alberto Pugnale presents the construction of Airshell, a small timber gridshell prototype erected by employing a pneumatic formwork.

In this paper by Gregory C Quinn, Christoph Gengnagel, and Chris JK Williams, a detailed comparison is carried out between …

This paper by Benjamin Felbrich, Nikolas Früh, Marshall Prado, Saman Saffarian, James Solly, Lauren Vasey, Jan Knippers, and Achim Menges describes the integrated design process and design development of a large-scale cantilevering demonstrator, in which the fabrication setup, robotic constraints, material behavior, and structural performance were integrated in an iterative design process.

Christoph Klemmt and Rajat Sodhi propose a method of double-curved façade construction that utilises identical discrete panels during the forming process, which are then trimmed in order to align to the desired free-form envelope.

Christoph Klemmt, Igor Pantic, Andrei Gheorghe, and Adam Sebestyen propose a methodology of discretized free-form Cellular Growth algorithms in order to utilize the emerging qualities of growth simulations for a feasible architectural design.

This paper by Kyle Schumann presents a sequence of introductory pedagogical exercises prescribed to undergraduate architecture students aimed at rapid skill development in analog and digital workflows.

This document by Andrea Settimi, Petras Vestartas, Julien Gamerro, and Yves Weinand aims to provide an overview of Cockroach’s most recent point cloud processing applications applied to digital fabrication and design.

This research by Xuyou Yang, Ding Wen Bao, Xin Yan, and Yucheng Zhao suggests an approach to accelerate the topology optimisation process of structures in architectural form-finding by replacing iterative calculation procedures with an end-to-end algorithm via conditional generative adversarial networks.

This paper by Sida Dai, Michael Kleiss, Mostafa Alani, and Nyoman Pebryani presents a reinforcement learning (RL) based design method for kinetic facades to optimize the movement direction of shading panels.

This paper by Farzaneh Oghazian, Nathan Brown, and Felecia Davis presents an optimization-based calibration process for tuning a digital formfinding algorithm used with knitted textile materials in architectural tension structures.

M. Gardiner, R. Aigner, H. Ogawa, and R. Hanlon present a design method that prioritises in-context design for origami surfaces with periodic tessellations in a parametric CAD workflow using Grasshopper 3D.

This research paper by Vishu Bhooshan, Mathias Fuchs, and Shajay Bhooshan explores the use of 3D-printing technologies in prototyping of Topology Optimization (TO) driven design.

The aim of this paper by Samuel Wilkinson and Sean Hanna is to demonstrate a new approach to approximating wind pressure on tall buildings for the application of generative design exploration and optimisation.

This research by Omid Oliyan Torghabehi identifies the key design parameters and design constraints of reciprocal systems. The results demonstrate the complex coupling of geometry, structural performance and fabrication in these systems, hence an essential need for application of an integrative design process.

This research Omid Oliyan Toghabehi, Peter von Buelow, Steven Mankouche, and Kasey Vliet studied the natural occurrence of branch bifurcations in different wood species to develop practical concepts for design and fabrication of timber joinery in a single bifurcated wood form which would replace traditional mortise and tenon or steel connections.

This research paper by Omid Oliyan Torghabehi presents a novel computational workflow for design, analysis and fabrication of multi-performance reciprocal systems with planar elements.

This thesis by Roland Hudson, is aimed at establishing a detailed understanding of the tasks related to this new specialism and to develop a set of considerations that should be made when undertaking these tasks.

The present research by Luis Quispe and Wilfredo Ulloa applies the Parametric Design (PD) and Generative Design (GD) for the generation of complex structures, through the BIM methodology, being implemented in design phase of a new modern proposal for Pavilion J1 of the National University of Engineering from Perú.

Vasiliki Kondyli, Mehul Bhatt, and Timo Hartmann present a precedent-based parametric design method that integrates people-centred design “precedents” rooted in empirical evidence directly within state of the art parametric design systems.

This paper by Arturo Lyon and Rodrigo Garcia presents three projects involving the design and fabrication of architectural structures through the use of different parametric software and digital manufacturing methods.